Annual factory recertification

To maintain the warranty and ensure the safe operation of devices TwinPoint autobelays are subject to annual factory recertification on the fact of use once a year, but not more than 50,000 descents, which must be carried out by ONLY an authorized service center or manufacturer of CK FormAT.

It is FORBIDDEN to use an autobelay after the date indicated on the certificate of annual factory recertification.

Operation of TwinPoint autobelay without a valid certificate of annual factory recertification will invalidate the warranty of the manufacturer of CK FormAT and make autobelay unsuitable for use.

At the onset of the period of annual factory recertification, it is necessary to send autobelay to an authorized service center or manufacturer of CK FormAT at the address specified in this operation manual.

Delivery of autobelay for scheduled maintenance and back to the buyer is carried out at the expense of the buyer. To send an autobelay, you must keep the original packaging for the entire life of the autobelay.

The cost of annual factory recertification does not include the replacement of webbing line, replacement parts and parts that are worn, not corresponding to the correct operation of autobelay, as well as replacement parts (brake pads, etc.) and parts that have expired, and therefore they must be replaced.

Upon the fact of annual factory recertification, CK FormAT issues a certificate. In the process of annual factory recertification in case of need of repair, replacement parts, and/or consumables that are ran-out, which does not correspond to the correct operation of autobelay, an authorized service center or a manufacturer of CK FormAT will notify the buyer in the shortest possible time for further repair or replacement of parts and consumables after payment of the invoice.

The annual factory recertification report indicates the results of inspection and testing of a complete webbing line, carabiner, brake mechanism (brake shoes, weights), locking mechanism (ratchet pawls, springs), retractor mechanism, connecting bracket. For each of these parts, the inspector of an authorized service center or the manufacturer of the IC form puts the appropriate mark: “breakage”, “missing”, “expired”, “normal condition”, “new part”, etc. with the conclusion “suitable for further use" or "prohibited for further use".


Registration of autobelay
Register
Replacement parts and consumables, repair and troubleshooting
Order
Operation instructions, inspection and replacement of webbing line and nozzle
View more
Top